At factory oxygenation stations, safe operation is crucial. Therefore, attention should be paid to the use of oxygen measurement systems, oxygen alarms or handheld oxygen detectors to prevent explosion accidents caused by excessive oxygen concentration. The main task of the oxygen filling station is to put the produced oxygen into high-pressure oxygen cylinders through an oxygen compressor, and then sell it to the industrial sectors in need. However, there is a risk of oxygen leakage throughout the production, oxygenation and bottling process, and even if the oxygen pipeline is well sealed, it is difficult to avoid minor oxygen leakage. When 99% pure oxygen leaks, the oxygen concentration in the workshop will exceed the standard, and too high an oxygen concentration will be flammable and explosive. Therefore, oxygenation stations need to use oxygen alarms and handheld oxygen detectors to monitor and monitor the oxygen concentration in the workshop. Many oxygen station accidents are caused by failure to take oxygen measurement measures in time, resulting in excessive oxygen concentration in the workshop, and violent explosions are prone to occur when flammable gases are encountered.

Therefore, it is very necessary to install oxygen alarms in industrial oxygenation stations. Once the oxygen concentration exceeds the standard, the alarm will sound a reminder and the staff can take timely response measures. In addition, where high concentrations of oxygen exist, the presence of flammable gases should be avoided as much as possible. If it cannot be avoided, an oxygen alarm should be installed to detect on-site oxygen leaks at any time to prevent explosion accidents caused by combustible gas concentrations reaching the lower explosion limit. Oxygen detector is a gas leak alarm device used in most industrial fields. It is a portable or handheld movable instrument . This kind of instrument can usually be used for up to 3 years. If the quality of the gas sensor built into the instrument is not good, its service life may be only about one year. Therefore, the quality of the sensor directly determines the service life of the oxygen detector.

The KE-LF series is a lead-free Galvanic battery oxygen sensor developed by Maxell Co., Ltd. of Japan . Each model has its own features to meet different application needs. The KE-25LF and KE-25F3LF offer a good balance between response time and an expected service life of up to 5 years in ambient air, while the KE-25F3LFM extends the measurement range to 100% Vol. oxygen. The KE-12F3LF is ideal for applications requiring fast response. In addition, the KE-50LF has the longest service life in the series, up to 10 years . Explore the complete line of KE-LF Series sensors to find the best sensor model for your application, ranging from environmental monitoring, safety, and food processing to health and medical applications.
TGS4260 is a constant potential electrolytic oxygen sensor with the characteristics of wide detection concentration range and wide operating temperature range. Its performance can meet the requirements of relevant European and American technical standards. This sensor is ideal for size-oriented applications such as portable oxygen detectors and multifunctional gas detectors.

The detection range of oxygen sensor principle characteristics is as follows: As the leading domestic industrial product procurement and trading service platform for sensors and instruments, ISweek Industrial Network has brought together high-quality industrial technology sensor products from all over the world in order to meet the needs of market development and is committed to serving the world. Buyers, suppliers, traders, and manufacturers of industrial technology products provide one-stop product sales and procurement services for the entire industry chain. The technical department of Gongcai.com is composed of experienced and qualified FAE technical engineers, who receive direct training and technical guidance from the original factory. They work extensively with customers to recommend suitable sensors to ensure that enterprise customer requirements are met, and provide customers with comprehensive application and technical support. Gongcai.com also represents British Alphasense, British City, Japanese Figaro, British SST, Austrian SensorE, American AII, German MST, American Southland, American OKsidyne, Japanese Komyo, German envitec, German ITG, American Maxtec, and Honeywell Honeywell and other major imported brands of oxygen sensors . If you want to know more about oxygen sensor product information and applications, please consult the online technical engineers of Gongcai.com.